Telp : +8618150976625
Surel : Hello@MicrofiberLeather.com
Jewelry box inserts made from crackle-embossed suede sheet: die-cut trays and liners, 0.4-0.6 mm, 1370 mm wide, five colours. Send your layout for a sample.
Bahan :
Microfiber SuedeKomposisi :
55% Nylon + 45% Polyurethane (PU)Ketebalan :
0.4 / 0.5 / 0.6 mmLebar :
1370 mm (54 inch)Warna :
5 stock shades (black, champagne, navy, rose pink, mint); custom colours availableWaktu memimpin :
Confirm against order and specificationKapasitas produksi :
About 1,000,000 metres per month (multi-product line)An insert is a fitting problem before it is a material problem. It has to hold each piece still, fit the tray it drops into, and keep doing that after hundreds of openings. This page covers the sheet we supply for die-cut inserts and the choices that decide whether the fit survives production.
|
0.4 / 0.5 / 0.6 mmsheet thickness
|
1370 mmroll width
|
5stock colours
|
300 mminimum run
|
One sheet becomes several kinds of insert depending on the box. A flat tray liner is die-cut to the tray floor; a ring or earring insert adds slots and pillows; a drawer pad is cut wider and wrapped over a board core; a display riser wrap covers a shaped block. The grade is the same — what changes is the die and the layering under the face.
Because we supply the sheet rather than the finished insert, the cut is yours to specify. Send the tray dimensions and the jewellery it has to hold, and the layout can be drawn around the pieces instead of forcing the pieces into a standard grid.
|
Parameter
|
What we supply
|
To confirm with you
|
|
Format
|
Die-cut sheet or continuous roll
|
tray size and compartment layout
|
|
Thickness
|
0.4 / 0.5 / 0.6 mm
|
pillow height and slot depth
|
|
Width
|
1370 mm (54 inch)
|
nesting and cutting layout
|
|
Surface
|
Fine pebbled, low-sheen
|
grain by plate
|
|
Composition
|
55% nylon / 45% PU
|
sensitive-metal requirement
|
|
Backing
|
Nonwoven
|
board, MDF or foam substrate
|
|
MOQ
|
300 linear metres per colour
|
sample before bulk
|
Need a different compartment? Send the jewellery list and the tray size; more on our suede sheet for packaging.
The face is a coated film over a fabric base, so a clean die cuts it without the edge fraying. It lays flat onto MDF, cardboard or EVA foam and takes a folded, rounded edge for a tray wall. Give the die house the smallest slot width and the pillow shape, and test one insert before the full run — the material is consistent, but the fit is a drawing decision.
A note on the word suede here: the surface is pebble-embossed, not raised pile. In packaging trade the term refers to the soft low-sheen hand and the fabric structure. Approve a physical sample so the grain and hand are what you expect, not a dictionary definition.
A tray that fits on the drawing can still fail at the die, so we work from the physical sample: the approved swatch is checked for shade and texture before packing, and each new run is traced back to that same sample. Send the tray, the jewellery and the slot layout together — a dimension alone does not tell us how deep a pillow needs to sit or how tight a ring channel should be. Box and display makers approve one cut insert, then repeat it to that template.
Yes. Inserts can be cut to standard and non-standard tray dimensions. Send the tray size and the jewellery it holds so the grid, slot spacing and compartment structure can be drawn to fit.
Velvet, suede, linen, PU leather, microfiber, MDF, cardboard and EVA foam, depending on the insert type. This page is the suede sheet — a pebble-embossed coated fabric on a textile back — used as the face of a die-cut insert.
For the sheet we supply, the 300 metre minimum applies per colour, because each shade runs as its own batch. A mixed-colour programme is quoted shade by shade rather than as one combined quantity.
Yes. Tell us the layout and the colour and we will return a material swatch for approval first, so the grain and hand are signed off before the run.
Sheet material. We supply the suede that box and display makers die-cut into inserts; we are not the maker of the finished insert or the box. That keeps the material grade consistent and lets you control the compartment layout.
Tell us the tray size, the jewellery it holds and the colour. We will reply with the grade and a physical swatch, freight collect.
Request Insert SampleTAG PANAS :